POWERSUPPLY
Insertback-upbattery(CR2032)
The back-up battery ensures that the stored settings
are not lost in the case of a power failure.
Caution:
Danger of explosion if battery is incorrect-
7
lyreplaced. Replace only with the same or
equivalent type.
1 U nscrew safety bolt of the battery compartment
cover panel and remove the cover panel.
2 I nsert the included backup battery with the posi-
tive pole facing upwards.
3 C lose the battery compartment cover panel and
screw in the safety bolt.
Mainsoperation
Check that the mains voltage on the type plate cor-
responds to your local mains supply. If this is not
the case, contact your specialist dealer.
1 I nsert the plug of the supplied power adapter
cable into the »DC5V >
2 P lug the power adapter into the wall socket.
Caution:
The device is connected to the mains with the
7
power adapter. Pull out the power adapter
plug if you want to completely disconnect the
device from the mains.
4
ENGLISH
---------------------------------------------------------------------------------------------------------------
« socket.