10­ Ipod/Iphone­mode; Made For Ipod/Iphone; Playing The Contents Of An Ipod/Iphone; Repeating The Current Track - Grundig SONOCLOCK 935 IP DAB+ Manual

IPOD/IPHONE­MODE
Made­for­iPod/iPhone
"Made for iPod/iPhone" means that an electronic
accessory has been designed to connect specifi-
cally to an iPod/iPhone, and has been certified by
the developer to meet Apple performance stand-
ards. Apple is not responsible for the operation of
this device or its compliance with safety and regu-
latory standards.
iPhone, iPod, iPod classic, iPod nano, iPod shuffle,
and iPod touch are trademarks of Apple Inc., reg-
istered in the U.S. and other countries.
Notes:
T he device is able to recharge the internal
7
battery of your iPod/iPhone. If you need to
recharge your iPod/iPhone, please power up
the device.
Your iPod/iPhone will use its backlight settings
7
as configured. If these need changing, use the
settings menu on your iPod/iPhone.
Using the menus of the iPod/iPhone, you can
7
select the existing structures (Playlists, Artists,
Albums, etc.) and tracks.
Supported­iPod/iPhone­models­
with­SC­935­iP­DAB+
The software is made to support the following
iPod/iPhone models:
– iPhone 5
– iPod touch (5th Generation)
– iPod nano (7th Generation)
­ 1 0 ENGLISH
­------------------------------------------------------------------------------------------
Playing­the­contents­of­an­iPod/
iPhone
1 Connect your iPod/iPhone into the »iPod­dock«
until it latches into its place.
2 Switch on the device from stand-by mode by
pressing »ON/OFF«.
3 Select the input source with »MODE­/­
P«.
– Display: »I
– P layback starts automatically with the last
played passage.
4 Adjust the volume with »–­VOLUME­+«.
5 To pause playback, press »PROG­­
6 To resume playback, press »PROG­­
Repeating­the­current­track
1 During playback, press briefly »
Selecting­another­track
1 During playback, press »
until the track is reached.
– P layback of the selected track or file starts au-
tomatically.
Searching­for­a­passage­within­
a­track
1 During playback, press and hold »
move through the current file.
2 Release » r « or »
found.
Displaying­information­for­the­
current­title
1 To display information on the current title, press
»INFO/MENU« repeatedly.
R
II«.
e
II« again.
e
r « kurz drücken.
r « or » e « repeatedly
r « or »
e « when the passage has been
«.
e « to