Audiovox VBP4000 Owner's Manual page 9

5) Unzip the bag and flip down the front flap. Ensure the inside
Velcro straps of the bag is fastened to prevent the unit from
falling. Swing the monitor upwards and adjust the screen for
desired viewing angle.
2. Installing the system between the driver/passenger seat
(Refer to Figure 8)
1)Take one of the supplied straps from the lower compartment of
the bag, and connect the latch to the upper side or rear (depend-
ing on the desired viewing angle) metal ring on the left side of the
bag. Attach the "S" hook to the same ring after looping the strap
around the headrest of the driver's seat. Repeat this process for
the right side (Passenger Seat).
2)Take another strap and connect the latch to lower metal ring on
the left side of the bag. Attach the "S" hook to the same ring after
looping the strap around the driver's seat rail. Repeat this pro-
cess for the right side. In some vehicles, it may be necessary to
Figure 8
9
the