Audiovox VBP4000 Owner's Manual page 35

1. Plug the video output from your game system into the yellow video
jack and the Audio L and Audio R into the applicable jacks on the left
side of the main unit, which takes priority to the built-in DVD player.
Adjust the volume control and the brightness control on the monitor
for individual preference.
2. Plug the video output from your game system into the yellow
VIDEO jack and the AUDIO L and AUDIO R into the applicable jacks
on the right side of the monitor, which takes priority over both AV
input into the main unit and the built-in DVD player. Adjust the volume
control and the brightness control on the monitor for individual
preference.
I. Wired Headphone (Refer to Figure 14)
Optional wired headphones may be used with the "Video In a Bag"
System. Simply plug in the headset to either HEADPHONE 1 jack or
HEADPHONE 2 jack on the left side of the monitor.
Note: Using HEADPHONE 1 jack will disconnect the internal speak-
ers.
Support Monitors
J.
1. Using MONITOR PORT (Refer to Figure 14 and Figure 15)
Besides the monitor combined with the main unit, this system can
drive up to 2 additional monitors (Please contact an Audiovox dealer
for the additional monitors) by using the cigarette lighter adapter in
the vehicle. (Note: The AC to DC adapter can drive only 1 main unit
and 1 monitor either combined or detached). Connect the PORT on
the additional monitor to either MONITOR 1 port or MONITOR 2 port
on the left side of the main unit with the supplied DIN cable. After
plugging in the main unit, DC 12V power, Audio/Video and IR signals
will all be supplied through DIN cable to the additional monitor.
35