Table of Contents
Advertisement
24 VDC 1.25A MAX: 2.1 x 5.5 mm dc power connector;
24 Vdc power input;
Power pack included
Power LED: Green LED, indicates operating power supplied via PoDM+ or 24 Vdc
local power pack
For pin assignment information, refer to the Appendix on page 15.
Configuration
This section provides configuration information about the following:
•
•
•
•
•
•
•
Video Wall Processing
Multiple DM-RMC-4K-SCALER-C units can be combined to configure a video wall
composed of up to 64 individual displays (up to eight columns of displays by eight rows of
displays). A separate DM-RMC-4K-SCALER-C is required for each display, and a
DigitalMedia switcher with sufficient DM 8G+ outputs is also required. Each
DM-RMC-4K-SCALER-C provides zoom capability and bezel compensation on its output to
display a portion of the source image.
To configure a video wall, use the Crestron Toolbox™ DMTool or use SIMPL Windows as
discussed in the following sections.
Configuration Using DMTool
An overview of the steps necessary to configure a video wall using DMTool follows.
NOTE:
1. Connect to the DigitalMedia switcher.
2. Connect to the desired DM-RMC-4K-SCALER-C.
3. Open the Setup window of the HDMI output.
4. In the Video Settings dialog box, configure the video wall. In addition, configure
Supplemental Guide – DOC. 7728A
Video wall processing
Adjustable underscan and overscan
User-selectable output resolution
Standby timeout
Display mode
EDID
Connection to a third-party HDBaseT transmitter
For detailed information, refer to the Crestron Toolbox help file.
bezel compensation to compensate for image loss at the edges of the display.
DM-RMC-4K-SCALER-C/-DSP: 4K DigitalMedia 8G+ Receivers • 5
Hide quick links:
Advertisement
Table of Contents
