Side View, Right - Crestron DM-RMC-4K-SCALER-C Supplemental Manual

Side View, Right

The following illustration shows the right side of the DM-RMC-4K-SCALER-C.
Side View, Right
LAN: 8-pin RJ-45 female, shielded, with two LEDs;

10BASE-T/100-BASETX Ethernet port;
Green LED indicates Ethernet link status;
Amber LED indicates Ethernet activity
NOTE:
to a DigitalMedia switcher.
HDMI OUT: 19-pin Type A HDMI female;

HDMI digital video/audio output (DVI compatible)
NOTE:
a DVI signal. CBL-HD-DVI interface cable is available separately.
HDMI LED: Green LED, indicates video signal presence at the HDMI output

DM IN: 8-pin RJ-45 female, shielded, with two LEDs;

DM 8G+ input, HDBaseT
PoDM+ PD (Powered Device) port;
Connects to the DM 8G+ output of a DM
to an HDBaseT device via CAT5e, Crestron DM-CBL-8G, or Crestron DM-CBL-ULTRA
cable;
Green LED indicates DM link status;
Solid amber LED indicates HDCP video;
Blinking amber LED indicates non-HDCP video
NOTE:
has a PoDM+ PSE (Power Sourcing Equipment) port. Any wiring that is connected to a
PoDM+ PSE port is for intrabuilding use only and should not be connected to a line that
runs outside of the building in which the PSE is located.
4 • DM-RMC-4K-SCALER-C/-DSP: 4K DigitalMedia 8G+ Receivers






Do not connect the LAN port to an Ethernet switch if the DM IN port connects
HDMI OUT requires an appropriate adapter or interface cable to accommodate
standard compliant;
®
Receiving PODM+ requires connection to a switcher or other equipment that
® switcher, transmitter, or other DM device, or
Supplemental Guide – DOC. 7728A