DM-RMC-4K-SCALER-C/-DSP:
4K DigitalMedia 8G+
Room Controllers with Scaler
Introduction
The DM-RMC-4K-SCALER-C and DM-RMC-4K-SCALER-C-DSP provide advanced
one-box interface solutions for a single display device as part of a complete Crestron
DigitalMedia™ system. Each device functions as a DM 8G+
and control interface, providing a single HDMI
Ethernet, RS-232, IR, and relay control ports are provided. Built-in scaling enables the
connected display to handle virtually any video signal—including 4K and Ultra HD.
The DM-RMC-4K-SCALER-C-DSP also provides internal surround sound processing.
For additional information about the various features and capabilities of the
DM-RMC-4K-SCALER-C and DM-RMC-4K-SCALER-C-DSP, refer to the product
specification sheet on the corresponding product page of the Crestron website
(www.crestron.com). For installation information, refer to the DM-RMC-4K-SCALER-C/
DM-RMC-4K-SCALER-C-DSP DO Guide (Doc. 7708) at www.crestron.com/manuals.
NOTE:
DM-RMC-4K-SCALER-C apply to both the DM-RMC-4K-SCALER-C and the
DM-RMC-4K-SCALER-C-DSP unless otherwise noted.
This guide provides information about the following:
•
•
•
•
•
Supplemental Guide – DOC. 7728A
Throughout the remainder of this guide, all references to the
Physical description of the top and side views of the DM-RMC-4K-SCALER-C
Configuration of some of the capabilities of the DM-RMC-4K-SCALER-C, for
example, video processing
HDCP 2.2. compliance
Troubleshooting
Pin assignments
DM-RMC-4K-SCALER-C/-DSP: 4K DigitalMedia 8G+ Receivers • 1
Receivers and
®
receiver, 4K/60 video scaler,
®
®
output. In addition, an analog audio output,
®