Hdcp 2.2 Compliance - Crestron DM-RMC-4K-SCALER-C Supplemental Manual

When the third-party HDBaseT transmitter device is added to slot 5, the HDBaseT
Transmitter symbol adds a COM port to the device and enables two-way serial
communication.
Addition of HDBaseT Transmitter to Slot 5 and COM Port in Slot 1

HDCP 2.2 Compliance

The DM-RMC-4K-SCALER-C is compliant with HDCP 2.2. HDCP 2.2, commonly referred
to as HDCP 2, is the next generation of HDCP (High-Definition Content Protection). Note the
following about HDCP 2:
•
•
•
•
•
•
12 • DM-RMC-4K-SCALER-C/-DSP: 4K DigitalMedia 8G+ Receivers
Compared to HDCP 1, HDCP 2 brings a higher level of cryptographic protection to
HDMI technology.
®
HDCP 2 is not HDMI 2. It is possible to have a system built on HDCP 1 and
HDMI 2, HDCP 2 and HDMI 1, or HDCP 2 and HDMI 2.
Although not all 4K content requires HDCP 2, most 4K consumer video content
does require HDCP 2.
Any product that supports HDCP 2 also supports HDCP 1.
HDCP matters only when the source demands HDCP. If the source demands
HDCP 2, then every device in the signal path must support HDCP 2.
There are no issues related to HDCP 2 and cabling—all cables are "compatible."
Supplemental Guide – DOC. 7728A