Configuration Using SIMPL Windows
Using SIMPL Windows, set the standby timeout in slot 3 for the DM-RMC-4K-SCALER-C
Scaler. To do so, set the <Scaler_Out_Standby_Timeout> analog input join to the desired
value.
NOTE:
Display Mode
The display mode of an image can be set to one of the following:
•
•
•
To configure Display Mode settings, use DMTool or SIMPL Windows as discussed in the
following sections.
Configuration Using DMTool
An overview of the steps necessary to set Display Mode using DMTool follows.
NOTE:
1. Connect to the DigitalMedia switcher.
2. Connect to the DM-RMC-4K-SCALER-C.
3. Open the Setup window of the HDMI output.
4. In the Video Settings dialog box, select the desired value in the Display Mode
Supplemental Guide – DOC. 7728A
Video Settings Dialog Box—Standby Timeout Configuration
For detailed information, refer to the SIMPL Windows help file.
Maintain aspect ratio
Stretch to fit
1:1 pixel mapping
For detailed information, refer to the Crestron Toolbox help file.
drop-down list.
DM-RMC-4K-SCALER-C/-DSP: 4K DigitalMedia 8G+ Receivers • 9