Configuration Using DMTool
An overview of the steps necessary to adjust underscan and overscan settings using
DMTool follows.
NOTE:
1. Connect to the DigitalMedia switcher.
2. Connect to the DM-RMC-4K-SCALER-C.
3. Open the Setup window of the HDMI output.
4. In the Video Settings dialog box, select the desired value in the Underscan Mode
Configuration Using SIMPL Windows
An overview of the steps necessary to adjust underscan and overscan settings using SIMPL
Windows follows.
NOTE:
•
•
User-Selectable Output Resolution
The output resolution of the scaler is user selectable. To select the output resolution, use
DMTool or SIMPL Windows as discussed in the following sections.
Configuration Using DMTool
An overview of the steps necessary to select the output resolution of the scaler follows.
1. Connect to the DigitalMedia switcher.
2. Connect to the DM-RMC-4K-SCALER-C.
3. Open the Setup window of the HDMI output.
Supplemental Guide – DOC. 7728A
For detailed information, refer to the Crestron Toolbox help file.
and Overscan Mode drop-down lists as necessary.
Video Settings Dialog Box—Underscan and Overscan Configuration
For detailed information, refer to the SIMPL Windows help file.
Adjust underscan in slot 3 for the DM-RMC-4K-SCALER-C Scaler. Set the
<Scaler_Out_Underscan_Mode> analog input join to the desired value.
Adjust overscan in slot 4 for the DM-RMC-4K-SCALER-C DM Input. Set the
<Source_Overscan_Mode> analog input join to the desired value.
DM-RMC-4K-SCALER-C/-DSP: 4K DigitalMedia 8G+ Receivers • 7