Connection To A Third-Party Hdbaset Transmitter - Crestron DM-RMC-4K-SCALER-C Supplemental Manual

EDID Configuration Dialog Box

Connection to a Third-Party HDBaseT Transmitter

The DM-RMC-4K-SCALER-C is HDBaseT certified, enabling direct connection to other
HDBaseT certified equipment. Via the DM 8G+ input, the DM-RMC-4K-SCALER-C can be
connected directly to a third-party HDBaseT compliant source without requiring a
DigitalMedia transmitter.
SIMPL Windows allows an HDBaseT transmitter device to be added to the
DM-RMC-4K-SCALER-C. The HDBaseT transmitter device adds a COM port to the
DM-RMC-4K-SCALER-C and enables two-way serial communication.
To add a third-party HDBaseT transmitter device to the DM-RMC-4K-SCALER-C, use
SIMPL Windows. An overview of the necessary step follows.
NOTE: For detailed information, refer to the SIMPL Windows help file.
In the Configure View of SIMPL Windows, add a third-party HDBaseT transmitter device to
slot 5 for the HDBaseT transmitter slot of the DM-RMC-4K-SCALER-C.
HDBaseT Transmitter Slot (Slot 5)
DM-RMC-4K-SCALER-C/-DSP: 4K DigitalMedia 8G+ Receivers • 11
Supplemental Guide – DOC. 7728A