Advertisement
PNP/PCI CONFIGURATION Setup
Resources Controlled By
Reset Configuration Data
Figure 3 -6. PNP/PCI CONFIGURATION SETUP Screen
Resources Controlled By - Allows users to use what kind IRQs assignment. The
available options are:
•
Auto (default)
The default of " Resources Controlled By" is Auto. If users set Manual option
for the setting," IRQ-3 / IRQ-4 / IRQ-5 / IRQ-7 / IRQ-9 / IRQ-10 / IRQ-11 /
IRQ-12 / IRQ-14 / IRQ-15 / DMA-0 / DMA-1 / DMA-3 / DMA-5 / DMA-6 / DMA-7
assigned to" options below will be shown on the screen.
Reset Configuration Data - Clears the data in ESCD area. ( Extended System
Configuration). The available options are:
•
Enabled (default)
IRQ-3 / IRQ-4 / IRQ-5 / IRQ-7 / IRQ-9 / IRQ-10 / IRQ-11 / IRQ-12 / IRQ-14
/ IRQ-15 / DMA-0 / DMA-1 / DMA-3 / DMA-5 / DMA-6 / DMA-7 assigned to -
Users can select resources controlled by
IRQ & DMA in Plug & Play problem . Legacy card has the highest priority to use
someone IRQ# & DMA# which one assigned by manual . The available options
are:
•
Legacy ISA (default of IRQ-3 / IRQ-4 / IRQ-7 / IRQ-14 / IRQ-15 assigned to)
•
PCI/ISA PnP (default of IRQ-5 / IRQ-9 / IRQ-10 / IRQ-11 / IRQ-12 / DMA-0 /
DMA-1 / DMA-3 / DMA-5 / DMA-6 / DMA-7 assigned to)
PCI IRQ Actived By - Programs the PCI IRQ to single edge or logic level.
Level/Edge sensitivity is programmed per controller. Every IRQ input for a given
bank is either
DGE" or
PCI IDE IRQ Map To - Defines the IDE IRQ Routing either from the PCI Bus or
the ISA Bus. The available options are:
•
PCI-AUTO (default)
ROM PCI/ISA BIOS <<P5HX-A>>
PNP/PCI CONFIGURATION
AWARD SOFTWARE, INC.
: Auto
PCI IRQ Actived By
: Disabled
PCI IDE IRQ Map To
Primary
IDE INT#
Secondary IDE INT#
ESC : Quit
F1
: Help
F5
: Old Values
F6
: Load BIOS Defaults
F7
: Load Setup Defaults
•
Manual
•
Disabled
anual" method to fix legacy ISA card
EVEL" (default) triggered.
•
ISA
P5HX-A
: Level
: PCI-AUTO
: A
: B
↑↓→←: Select Item
PU/PD/+/- : Modify
(Shift)F2 : Color
User's Manual 1-31
Advertisement
