Advertisement
P5HX-A
q
PNP/PCI CONFIGURATION SETUP - This option is used to set the
various system function and internal addresses of the PCI devices. Allows
users to configure system IRQ and DMA to PCI/ISA PnP or Legacy ISA .
q
LOAD BIOS DEFAULTS - Users can load the BIOS default values to boot
the system safely.
q
LOAD SETUP DEFAULTS - This option supports the better performance for
the system. It is recommended to choose SETUP Defaults for the setup.
q
INTEGRATED PERIPHERALS - This option allows users to decide how
many kinds peripherals need to change their I/O type , mode and used or not .
This options also allows user to set the various system function and onboard
PCI IDE controller.
q
SUPERVISOR PASSWORD - Password is required when entering and
changing all of the SETUP option or booting your system. Users can change
the current password stored in the CMOS by accessing this option.
q
USER PASSWORD - Password is required when booting your system and
entering to change only the USER PASSWORD . Users can change the
current password stored in the CMOS by accessing this option.
q
IDE HDD AUTO DETECTION - This option can automatic detect the hard
disk drive type(s) including the number of cylinders and heads, write pre-
compensation time, read/write head landing zone, and number of sectors per
track.
q
SAVE & EXIT SETUP - After saving the changes what you have made in the
SETUP program, then exit and reboot the system.
q
EXIT WITHOUT SAVING - Abandon all previous settings, then exit and
reboot the system.
After choosing an item from the SETUP main menu, move the cursor by using the
↑,↓,→,← arrow keys and press <Enter>. To modify the setting of an option,
simply press the <PgUp> or <+> and the <PgDn> or <-> keys. Press the <F2> key
when changing the color setting, <F1> for a context sensitive help function, and the
<ESC> key when quitting SETUP.
User's Manual 1-22
Advertisement
