Advertisement
P5HX-A
Standby Mode - Sets the timer interval when the system enters STANDBY mode.
The available options are:
•
Disabled (default)
•
1/2/4/6/8/10/20/30/40 Min
Suspend Mode -Sets the time interval when the system enters SUSPEND mode.
The available options are:
•
Disabled (default)
•
1/2/4/6/8/10/20/30/40 Min
HDD Power Down - Sets the timer of the HDD when to enter the Standby mode.
The available options are:
•
Disabled (default)
Wake Up Events In Doze & Standby
IRQ 3/4/8/12 (Wake-Up Event) - Sets the wake-up event to
when system enters the suspend mode.
Power Down & Resume Events
Power Down Activities - The manual also lists the Power Management SETUP
(PM) events by which the system wakes up from STANDBY or SUSPEND modes.
Switch the following parameters to
•
COM Ports Accessed
•
LPT Ports Accessed
•
Drive Ports Accessed
•
IRQ3 (COM2)
•
IRQ4 (COM1)
•
IRQ5 (LPT2)
•
IRQ6 (Floppy Disk)
•
IRQ7 (LPT 1)
The default values of
RQ11 (Reserved)" are OFF now. In the following version (V1.2), these
values will be changed to ON.
User's Manual 1-30
•
1 Hour
•
1 Hour
•
1....15 Min
N" or
FF":
•
IRQ8 (RTC Alarm)
•
IRQ9 (IRQ2 Redir)
•
IRQ10 (Reserved)
•
IRQ11 (Reserved)
•
IRQ12 (PS/2 Mouse)
•
IRQ13 (Coprocessor)
•
IRQ14 (Hard Disk)
•
IRQ15 (Reserved)
RQ9 (IRQ2 Redir)" ,
RQ10 (Reserved) " and
N" or
FF"
Advertisement
