Ethernet Communication Specifications - Mitsubishi Electric NZ2GN2S1-16D User Manual

3.2

Ethernet Communication Specifications

The following table shows the Ethernet communication specifications for the I/O module.
Item
Transmission specifications Data transmission speed
Communication mode
Interface
Maximum frame size
Maximum segment length
Number of cascade
connections
IP version
*1 The data transmission speed can be switched by using the communication speed setting function.
The availability of communication speed setting function varies depending on firmware versions of modules used. ( Page 256
Added and Changed Functions)
*2 For the maximum segment length (length between switching hubs), check with the manufacturer of the switching hub to be used.
Description
1Gbps or 100Mbps
1000BASE-T Full-duplex
100BASE-TX
• RJ45 connector (AUTO MDI/MDI-X)
• M12 waterproof connector (AUTO MDI/MDI-X)
1518 bytes
*2
100m
1000BASE-T Check with the manufacturer of the switching hub to be used.
100BASE-TX
IPv4
*1
3 SPECIFICATIONS
3.2 Ethernet Communication Specifications
3
21