Tumble Drying; Sort Your Fabrics; Turn On The Main Power Switch; Open The Door, Load The Items And Then Close The Door - Asko T793 Operating Instructions Manual

Tumble drying

Below are step-by-step instructions to help
you achieve the best possible tumble-drying
results.

Sort your fabrics

1
You will achieve the most uniform drying
results if the items are made of the same
type of material. Do up zips and buttons,
fasten belts, sort the items and adjust the load
and temperature.

Turn on the main power switch.

2
Open the door, load the items
3
and then close the door

Select the program

4
Select a program by turning the program
selector. The name of the selected
program is highlighted and the finish time of
the program also appears on the display. Start
the program by pressing the Start button, or
press the button in the centre of the program
selector to go on and select Options.
Guidelines as to what specific programs can
be used for.
Auto extra dry
This program is for items that are particularly
difficult to dry, e.g. jeans with very thick
seams.
Note!
Knitted fabrics in particular are prone to
shrinkage. Use the Auto dry, Auto normal dry
or Auto Iron dry programs for these items.
Stretch clothes back into shape immediately
after drying.
Auto dry and Auto normal dry
These programs shut off the heat once the
load is dry but before it is "bone-dry". The
Auto dry program shuts off the heat slightly
later than Auto normal dry. Use trial and error
to find out what works best. Use these
programs when you want items to be
completely dry.
Auto Iron dry
This program shuts off the heat once the load
is just damp enough for ironing or pressing.
Timed dry
The program length you choose depends on
what you intend to do with the items after
drying them. Use trial and error to find out
what works best. When you use Timed dry to
tumble-dry a load of mixed fabrics, some of
the garments may remain damp. Tumble-dry
any damp garments for a further 30 minutes
or so using the Timed dry program.
Note!
When using the Timed dry program, garments
can become "over-dry" if you have selected
too long a drying time. This can cause the
items to shrink or crease and become rough.
Synthetic materials can also become charged
with static electricity.
Setting the time for the Revitalise or
Timed dry program
For the Revitalise program and the Timed dry
program, you set the number of minutes
incrementally. The selected time is shown on
the display. You can try out different drying
times.
Revitalise program
Use the Revitalise program when you just
want to refresh, air or soften up items.
11