Tumble Drying; Sort Your Fabrics; Turn On The Main Power Switch; Open The Door, Load The Items And Then Close The Door - Asko TDC111V Operating Instructions Manual

Tumble drying

Below are step-by-step instructions to help you
achieve the best possible tumble-drying results.
1

Sort your fabrics

You will achieve the most uniform drying
results if the items are made of the same
type of material. Do up zips and buttons, fasten
belts, sort the items and adjust the load and
temperature.
2

Turn on the main power switch.

Open the door, load the items
3
and then close the door
4

Select the program

Guidelines as to what specific
programs can be used for.
The Auto extra dry, Auto dry and Auto normal dry
programs have two temperature settings. Normal
temperature but also Low temperature for more
delicate items.
Auto extra dry
Temperature normal. This program is for items
that are particularly difficult to dry, such as jeans
with very thick seams.
Auto dry
Temperature normal. These programs shut off
the heat once the load is dry but before it is "bone
dry". The Auto dry program shuts off the heat
slightly later than Auto normal dry. Use trial and
error to find out what works best. Use these
programs when you want items to be completely
dry.
Auto normal dry
Temperature normal. These programs shut off
the heat once the load is dry but before it is "bone
dry". The Auto dry program shuts off the heat
slightly later than Auto normal dry. Use trial and
error to find out what works best. Use these
programs when you want items to be completely
dry.
10
Auto extra dry
Energy Save. This program is for items that are
particularly difficult to dry, such as jeans with very
thick seams.
Auto dry
Energy Save. These programs shut off the heat
once the load is dry but before it is "bone dry".
The Auto dry program shuts off the heat slightly
later than Auto normal dry. Use trial and error to
find out what works best. Use these programs
when you want items to be completely dry.
Auto normal dry
Energy Save. These programs shut off the heat
once the load is dry but before it is "bone dry".
The Auto dry program shuts off the heat slightly
later than Auto normal dry. Use trial and error to
find out what works best. Use these programs
when you want items to be completely dry.
Auto iron dry
This program shuts off the heat once the load is
just damp enough for ironing or pressing.