Table of Contents
Advertisement
VEP 15.6 Multi Touch, VEP 21.6 Multi
Touch
1 About this documentation
Editions of this documentation
Edition
Release
Date
Edition 01
2015-06
Edition 02
2018-05
Tab. 1-1: Change Record
1.1 Overview on target groups and product phases
In the following illustration, the framed activities, product phases and target
groups refer to the present documentation.
Example: In the product phase "Mounting (assembly/installation)", the "mechan-
ic/electrician" can execute the activity "install" using this documentation.
Product
Selection
phases
Presales Aftersales
Design engineer
Programmer
Technologist
Target
Process
groups
specialist
Select
Prepare
Activities
Design
Construct
Fig. 1-1: Assigning the present documentation to the target groups, product phases and ac-
tivities of the target group
1.2 Purpose
This document instructs the technical staff of the machine manufacturer on how
to perform the mechanical and electrical installation safely and on how to com-
mission the device.
DOK-SUPPL*-VEPXX.6MTHU-IT02-EN-P
Notes
First edition
VEP 07.6 variant removed, VEP 21.6 variant supplemented.
Mounting
Engineering
(assembly/installation)
Mechanic/
electrician
Commissioning engineer
Unpack
Parameterize
Mount
Program
Install
Configure
Simulate
About this documentation
Commissioning
Operation
Programmer
Technologist
Process specialist
Machine
operator
Maintenance
technician
Service
Optimize
Operate
Test
Maintain
Remove
Create
the NC program
Bosch Rexroth AG
Decommissioning
Mechanic/
electrician
Disposal company
Dismount
Dispose
faults
1/53
Advertisement
Table of Contents
