About This Documentation - Bosch Rexroth IndraControl VDP 15.3 Operating Instructions Manual

VDP 15.3, 18.3, 21.3 Multitouch

1 About this Documentation

Overview – target groups and product phases
The activities, product phases and target groups that refer to the present docu-
mentation are marked in red color in the following figure.
Example: In the product phase "Mounting (assembly/installation)", the "mechan-
ic/electrician" can execute the activity "install" using this documentation.
Selection
Product
phases
Presales
Design engineer
Programmer
Technologist
Target
Process
groups
specialist
To select
To prepare
Activities
To design
To construct
Fig. 1-1: Assigning the present documentation to the target groups, product phases and ac-
tivities of the target group
Purpose
This document instructs the technical staff of the machine manufacturer on how
to perform the mechanic and electrical installation in a safe way and on how to
commission the device.
Required qualifications: Individual who is able to assess the tasks assigned and
identify possible safety risks owing to qualification in the subject, knowledge
and experience. The individual should also be familiar with the standards and
regulations.
Scope
This operating instruction is valid for all multitouch operating displays whose
type code starts with "VDPxx.3...".
DOK-SUPPL*-VDPXX.3MTBU-IT02-EN-P
Mounting
Engineering
(assembly/installation)
Aftersales
Mechanic/
electrician)
Programmer
Commissioning engineer
To unpack
To parameterize
To program
To mount
To install
To configure
To simulate
Bosch Rexroth AG
About this Documentation
Operation
Commissioning
Technologist
Process specialist
Machine
operator
Maintenance
technician
Service
To optimize
To operate
To maintain
To test
To remove
faults
To create
the NC program
De-
commissioning
Mechanic/
electrician
Disposal company
To dismount
To dispose
1/37