Roland R100 Series Manual page 29

B0003306 / Rev. 1.0
Step 3
Fig. 17: Enabling editing
Step 4
Fig. 18: Changing the lower threshold value L
Step 5
Fig. 19: Selecting the upper threshold value U and changing the value
Step 6
Closing the setting:
With the key „exit" the values are stored. The system changes over to the measurement mode. The
changed thresholds will be used from now on.
Pos: 37 /Doppelblech/Geräte/R100/6 Inbetriebnahme / Bedienung/Teach-In mit geänderten Schwellwerten @ 0\mod_1184850230968_501.doc @ 4145
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Double Sheet Detector R100-Serie A100
for single sided sensors
Press the key "value".
Pressing the key "value" enables editing of the thresholds for L and U.
Editing is done with the absolute values, based on the current
measurement value.
R100TChangeHand+.bmp
The sign "!" before "L" indicates that the value L can be changed.
The key "-" decreases the L value,
the key "+" increases the value.
R100TChangeHandvalue.bmp
Select the parameter U with the key "next".
The sign "!" closes up to the "U".
The key "-" decreases the L value,
the key "+" increases the value.
Manual
R100TChangeHandNext.bmp
Start-up
29