Wlan Module - HP 268 Pro G1 MT Maintenance And Service Manual

Table of Contents

Advertisement

WLAN module

Table 4-2
WLAN module descriptions and part numbers
Description
HP xxxxxx WLAN 802.11abgn, 2 × 2 + Bluetooth 4.0
HP xxxxxx 802.11abgn, 2 × 2
The WLAN module is located near the memory modules.
NOTE:
WLAN module appearance can vary.
Before removing the WLAN module, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the access panel
Remove the WLAN module:
1.
Disconnect the antenna cables from the module (1).
NOTE:
antenna cable labeled 2/AUX connects to the WLAN module Aux terminal.
2.
Remove the screw (2) that secures the module to the computer.
3.
Pull the module to remove it from the slot (3).
To install the WLAN module, reverse the removal procedure.
NOTE:
WLAN modules are designed with a notch to prevent incorrect insertion.
Access panel on page
The WLAN antenna cable labeled 1/MAIN connects to the WLAN module Main terminal. The WLAN
(Preparation for disassembly on page
17.
16).
WLAN module
23

Advertisement

Table of Contents
loading

Table of Contents