Dell EMC PowerEdge R440 Installation And Service Manual page 76

Figure 68. Removing internal PERC riser
5. Turn the internal riser so that the PERC card is facing up.
6. Press the cable connector and disconnect the cable connected to the internal PERC card.
Figure 69. Disconnecting the cable from internal PERC card
Next steps
1. Install the air shroud.
2. Follow the procedure listed in
3. Install the internal PERC card.
Installing the internal PERC riser
Prerequisites
Follow the safety guidelines listed in
Steps
1. Connect the cable to the internal PERC card.
76 Installing and removing system components
After working inside your system
Safety instructions.
on page 26.