Installing The System Cover - Dell EMC PowerEdge R440 Installation And Service Manual

Figure 18. Removing the system cover

Installing the system cover

Prerequisites
1. Follow the safety guidelines listed in
2. Ensure that all internal cables are routed correctly and connected, and no tools or extra parts are left inside the system.
Steps
1. Align the tabs on the system cover with the guide slots on the system.
2. Push the system cover latch down.
The system cover slides forward, the tabs on the system cover engage with the guide slots on the system and the system
cover latch locks into place.
3. Using a 1/4 inch flat head or Phillips #2 screwdriver, rotate the latch release lock clockwise to the locked position.
Safety instructions on page 25.
Installing and removing system components 29