Installing The Processor Into A Processor And Heat Sink Module - Dell EMC PowerEdge R440 Installation And Service Manual

Figure 44. Removing the processor bracket
Next steps
Install the processor into the processor and heat sink module.

Installing the processor into a processor and heat sink module

Prerequisites
Follow the safety guidelines listed in
Steps
1. Place the processor in the processor tray.
NOTE: Ensure that the pin 1 indicator on the processor tray is aligned with the pin 1 indicator on the processor.
2. Flex the outer edges of the bracket around the processor ensuring that the processor is locked into the clips on the bracket.
NOTE: Ensure that the pin 1 indicator on the bracket is aligned with the pin 1 indicator on the processor before placing
the bracket on the processor.
NOTE: Ensure that the processor and the bracket are placed in the tray before you install the heat sink.
56 Installing and removing system components
Safety instructions