Connect Sump Controller To Wifi - Pentair HOME SUMP CONTROLLER Homeowner's Manual

CONNECT SUMP CONTROLLER TO WIFI

7
Step 1
Step 2
1. Select your home WiFi account, add
your home WiFi password and press
CONTINUE.
2. Set the location of your Sump Controller.
If you click on SELECT LOCATION, your
current location should appear; select it
and press SAVE. If not, manually enter
the address. Press OK when prompted.
3. You are now connected!
Note: During the first 20 pump cycles, the device learns what is
normal operating behavior in your installation. For example, how
long and the frequently at which the system runs, as well as how
much power is required to remove water from your application.
Over time, the device repeats this process to continue monitoring
the change in performance, ensuring you get notified of any
abnormalities.
PENTAIR HOME SUMP CONTROLLER HOMEOWNER'S GUIDE