Setting Up And Removing A Diagnostic Filter - AMX NetLinx NI-3101-SIG Operation/Reference Manual

Setting up and removing a Diagnostic Filter

1. Setup a diagnostic filter by scrolling down the page and clicking the Modify button below the first
empty column. This action opens the Device Configuration dialog as a secondary popup window.
Up to 8 concurrent diagnostic filter slots can be simultaneously active using any
eight of the 10 available user-configurable Presets available through the Device
Configuration dialog.
2. Configure a diagnostic filter using the parameters available within the Diagnostic Configuration
dialog.
3. A user can choose to either store these selections to a profile or recall a previously stored profile
configuration by either:
4. Once all modifications/selections within this dialog have been made, press the Update button to
save the changes and return to the Diagnostics dialog.
Diagnostic Configuration Dialog
Feature
Update:
Remove:
NI-3101-SIG Signature Series NetLinx Integrated Controller
The Diagnostic Configuration dialog allows you to select both the notifications you wish to
receive and the target devices (within the Online Tree) for these notifications. Several different
types of asynchronous notifications can be selected for a device:port:system (D:P:S)
combination. Each notification type is represented by a column in the table. All messages are
displayed in the Notifications tab of the Output Display window within NetLinx Studio v 2.4.
Select an open Preset number entry from within Presets drop-down list. Make all desired
notification selection and press the Store button. Pressing this button opens a popup field
labeled Explorer User Prompt - Preset Name?, intended for entering the name associated with
this new Preset.
Press OK to return to the previous Device Configuration popup dialog.
Click Cancel to exit this popup and return to the previous dialog box without making any
changes.
Press the down arrow (adjacent to the Preset drop-down list) to display a listing of all
currently available Presets. Select a previously configured Preset and press the Recall button
to populate all available fields and radio buttons with the selections associated with this
chosen Preset.
This preset mechanism is done via cookies so it does not persist across multiple
browsers/computers.
Description
Click this button once you have completed setting up your filter. The popup
then closes and returns you to the Diagnostics window.
• Watch the bottom Incoming Message pane for messages to begin coming in
from the target device(s).
Click this button to remove a selected Preset from being available within the
Presets drop-down list.
NetLinx Security within the Web Server
71