AMX NetLinx NI-3101-SIG Operation/Reference Manual page 93

Network Settings Dialog
Feature
IP Address:
Host Name
DHCP/Specify IP Address
IP Address
Subnet Mask
Gateway
DNS Address:
Domain Suffix
DNS IP #1, #2, #3
4. Enter a new or updated name within the Host Name field. This entry can be 1 - 50 alphanumeric
characters in length.
5. Select either the DHCP or Specify and IP Address checkbox to choose the source of the IP
Address information being used within the remaining fields.
6. Enter or change any IP Address or DNS Address information within the remaining fields.
7. Click Update to save any changes. If the changes are successfully updated to the Master, the
following message appears: "Network Settings updated. Device must be rebooted for the setting to
take effect".
8. Return to the System menu by clicking on the purple System icon from within the Online Tree, click
the Reboot button, and then allow the Master a short time to reboot itself.
9. Click on the Refresh macro from the browser's menu bar. If no security is currently enabled on the
target Master, the browser is directed back to the Manage WebControl Connections page. If security
is enabled, the browser is directed to the initial Username/Password page to enter personal access
information.
NI-3101-SIG Signature Series NetLinx Integrated Controller
Description
Use this field to view/edit the target Master's current Host Name.
Use these radio buttons to specify an address for the target Master:
• DHCP - obtained from a DHCP Server.
• Specify an IP Address - typically obtained from a System Administrator.
Use this field to view/edit the target Master's current IP Address.
Use this field to view/edit the target Master's current Subnet Mask assignment.
Use this field to view/edit the target Master's current Gateway assignment.
Use this field to view/edit the target Master's current Domain Suffix.
Use these fields to view/edit the target Master's current DNS IP addresses.
NetLinx Security within the Web Server
87