AMX NI-2000 Programming Manual page 26

Initial Configuration and Firmware Upgrade
FIG. 8 Sample NetLinx Workspace window (showing separate NI-Master and Controller)
6. Click on the desired Kit file link and after you've accepted the Licensing Agreement, verify you
have downloaded the Integrated Controller firmware (Kit) file to a known location.
7. From within Studio, select Tools > Firmware Transfers > Send to NetLinx Device from the Main
menu to open the Send to NetLinx Device dialog (FIG. 9). Verify the target's System number
matches the value listed within the active System folder in the OnLine Tree tab of the Workspace.
The Device must match the entry for the on-board Integrated Controller (ex: NI-4000 or
NI-700) device.
Selected on-board Integrated Controller firmware file
FIG. 9 Send to NetLinx Device dialog (showing on-board Integrated Controller firmware update via IP)
18
On-board NI Master
(NI-X000_Master) - Device 0
On-board Integrated Controller (NI-X000)
NetLinx Studio version
Unbound Dynamic Device
Firmware download
status
Device and System Number
must match the Device and System
values listed in the Workspace window
NI Series WebConsole & Programming Guide