AMX NI-2000 Programming Manual page 110

Terminal (Program Port/Telnet) Commands
Terminal Commands (Cont.)
Command
ON [D:P:S or NAME,CHAN]
PASS [D:P:S or NAME]
PHYSICAL STATUS
PING [ADDRESS]
PROGRAM INFO
102
Description
Turns on a specified channel on a device. The device can be on any
system that the Master you are connected to is able to reach.
You can specify the device number, port, and system, or the name of
the device that is defined in the DEFINE_DEVICE section of the pro-
gram.
Syntax:
ON[name,channel]
-or-
ON[D:P:S,channel]
Example:
>ON[5001:7:4]
Sending On[5001:7:4]
Sets up a pass through mode to a device. In pass through mode, any
string received by the device is displayed on the screen, and anything
typed is sent as a string to the device.
The device can be on any system that the Master you are connected
to is able to reach.
You can specify the device number, port, and system, or the name of
the device that is defined in the DEFINE_DEVICE section of the pro-
gram.
• Mode is exited by ++ ESC ESC.
• Display Format is set by ++ ESC n
Where n =
A, format = ASCII
D, format = Decimal
H = Hex
Note: Refer to the ESC Pass Codes section on page 113 for detailed
descriptions of the supported pass codes.
Example:
>pass[5001:7:4]
Entering pass mode.
Retrieve the current LED states.
Pings an address (IP or URL), to test network connectivity to and con-
firms the presence of another networked device. The syntax is just like
the PING application in Windows or Linux.
Example:
>ping 192.168.29.209
192.168.29.209 is alive.
Displays a list of program files and modules residing on the Master.
Example:
>PROGRAM INFO
-- Program Name Info
-- Module Count = 1
1 Name is i!-PCLinkPowerPointTest
-- File Names = 2
1 = C:\Program Files\AMX Applications\i!-
PCLinkPowerPoint
2 = C:\Program Files\Common
Files\AMXShare\AXIs\NetLinx.axi
2 = Name is MDLPP
-- File Names = 2
1 C:\AppDev\i!-PCLink-PowerPoint\i!-
PCLinkPowerPointMod.axs
2 C:\Program files\Common
Files\AMXShare\AXIs\NetLinx.axi
NI Series WebConsole & Programming Guide