AMX NI-2000 Programming Manual page 120

Terminal (Program Port/Telnet) Commands
Terminal Commands (Cont.)
Command
SHOW SYSTEM <S>
TCP LIST
TIME
URL LIST <D:P:S>
zeroconf
[enable|disable|status]
112
Description
Displays a list of all devices in all systems currently on-line.
The systems lists are either directly connected to this Master (i.e. 1
hop away), or are referenced in the DEFINE_DEVICE section of the
NetLinx program.
Optionally, you may provide the desired system number as a parame-
ter to display only that system's information (e.g. SHOW SYSTEM
2001).
The systems listed are in numerical order.
Example:
>SHOW SYSTEM
Local devices for system #50 (This System)
------------------------------------------------------------
Device (ID)Model
00000 (00256)Master
v2.10.75
(PID=0:OID=0) Serial='2010-12090',0,0,0,0,0,0
Physical Address=NeuronID 000239712501
(00256)vxWorks Image
v2.00.77
(PID=0:OID=1) Serial=N/A
(00256)BootROM
v2.00.76
(PID=0:OID=2) Serial=N/A
(00256)AXlink I/F uContr(00001)
(PID=0:OID=3) Serial=0000000000000000
00096 (00192)VOLUME 3 CONTROL BO(00001)AMX Corp.
v2.10
(PID=0:OID=0) Serial=0000000000000000
Physical Address=Axlink
00128 (00188)COLOR LCD TOUCH PAN(00001)AMX Corp.
v5.01d
(PID=0:OID=0) Serial=0000000000000000
Physical Address=Axlink
05001 (00257)NXI Download
v1.00.20
(PID=0:OID=0) Serial=0,0,0,0,0,0,0,0,0,0,0,0,
Physical Address=NeuronID 000189145801
(00257)NXI/NXI-1000 Boot(00001)
v1.00.00
(PID=0:OID=1) Serial=0,0,0,0,0,0,0,0,0,0,0,0,
10002 (00003)PHAST PLK-IMS
v3.12
(PID=0:OID=0) Serial=0000000000000000
Physical Address=NeuronID 0100417BD800
Displays a list of active TCP/IP connections.
Example:
>TCP LIST
The following TCP connections exist(ed):
1: IP=192.168.21.56:1042 Socket=0 (Dead)
2: IP=192.168.21.56:1420 Socket=0 (Dead)
Displays the current time on the Master.
Example:
>TIME
13:42:04
Displays the list of URL addresses programmed in the Master (or
another system if specified).
Example:
>URL LIST
The following URLs exist in the URL connection list
->Entry 0-192.168.13.65:1319 IP=192.168.13.65
State=Connected
Entry 1-192.168.13.200:1319 IP=192.168.13.200 State=Issue
Connect
Enable, disable or view the new zeroconf client in the Master.
When zeroconf is enabled (default) the Master's web interface will be
registered via zeroconf and can be viewed through a zeroconf browser
plug-in such as Bonjour for IE.
NI Series WebConsole & Programming Guide
(ID)Mfg FWID Version
(00001)AMX Corp. 00256
(00001) 00257
(00001) 00258
00270 v1.02
00000
32778
(00001)AMX Corp. 00260
00261
(00001)Phast Corp. 0003