LG LS-B0760CM/B0760HM Service Manual page 29

6. Indoor unit installation.
• Hook the indoor unit onto the upper portion of
installation plate. (Engage the two hooks of the rear
top of the indoor unit with the upper edge of the
installation plate.)
Ensure the hooks are properly seated on the instal-
lation plate by moving it in left and right.
7. Connecting the pipings to the indoor unit.
• Align the center of the pipings and sufficiently tight-
en the flare nut with fingers.
• Finally, tighten the flare nut with torque wrench until
the wrench clicks.
Wrench tightening the flare nut with torque wrench,
ensure the direction for tightening follows the
arrows on the wrench.
Pipe Size
Liquid Side (1/4")
Gas Side (3/8")
Gas Side (1/2")
8. Wrap the insulation material around the
connecting portion.
Press the lower left and right side of the unit against the
Installation Plate until the hooks engages with their slots
(sound click).
Torque
1.8kg.m
4.2kg.m
5.5kg.m
Wrap the isulation material around the connecting
portion.
- 29 -
Indoor unit
tubing
Spanner
Plastic Bands
Connecting cable
Drain hose
Flare nut Pipings
Torque wrench
Installation material