LG LS-B0760CM/B0760HM Service Manual page 25

5. Bend the tubing as shown in the figure and
bind the pipings, the connecting cables and the
drain hose altogether.
• Make a small loop for easy connection later.
6. Wrap the tubing, the drain hose and the con-
necting cable.
7. Indoor unit installation
• Hook the indoor unit onto the upper portion of
installation plate. (Engage the two hooks of the
rear top of the indoor unit with the upper edge of
the installation plate.)
Ensure the hooks are properly seated on the
installation plate by moving it in left and right.
CAUTION: Take care to arrange the pipings, drain
hose and cables as the feature 24 page
for inserting it into the indoor unit and
mount the indoor unit on the installa-
tion plate.
Connecting
cable
Press the lower left and right side of the unit against
the Installation Plate until the lower hooks engages
with their slots(sound click).
- 25 -
Tape
Loop
Gas side piping
Liqid side piping
Drain hose
Connecting cable
Drain hose