Ember Bed Glass And Ember Material Installation; Ember Bed Glass Installation - FireplaceXtrordinair 864 TV 40K Installation Manual

46 Finalizing the Installation

Ember bed Glass and Ember Material Installation

Ember bed Glass Installation


Make sure the ember skirt is in place. The skirt hooks over the front of the ember platform and
slopes outward toward the glass. The skirt helps keep the glass and ember material from
falling off the platform when the glass is removed.

Locate the perforations in front of the log grate.

Place a thick layer of the ember glass over the perforations making sure to cover all of the
holes completely.

Lightly dress the ember glass with the black touch-up paint provided. Check the appearance
with the lights on and add additional paint, as needed, for a realistic glowing ember
appearance.
NOTE: If power is supplied to the fireplace it can helpful to turn the lights on while painting so you can
determine an appropriate amount of paint for a realistic ember appearance.
NOTE: We recommend that you use a piece of paper, cardboard as a shield to mask the log grate and
burner from overspray (see below).
© Travis Industries
(for qualified installers only)
4/23/2021 - 1480
Scan this code with a
QR reader on your cell
phone to watch a video
of the setup.
http://vimeo.com/289322734
864 40K Install