Class A Chimney Conversion - FireplaceXtrordinair 864 TV 40K Installation Manual

Finalizing the Installation

Class A Chimney Conversion

Duravent provides a conversion kit for those wishing to use an existing class A chimney to vent this direct
fireplace. The illustration below gives an overview of this type of installation. See the instructions included
with the kit for details.

All requirements in the appliance manual must be met. This includes compliance with vent configuration
charts.. Remember to set the restrictor position to the correct position (based upon the vertical rise height
- see the vent charts in the appliance manual.

These conversion kits does not work on interior masonry chimneys.

The measurements below refer to the Chimney Inside Diameter
Chimney Conversion Kit A (46DVA-KCA)
6" DuraTech
6" Security Chimney
6" Metalbestos
6" Jackes-Evans
6" Hart & Cooley
6" Pro-Jet
Chimney Conversion Kit B (46DVA-KCB)
6" DuraPlus
7"-8" DuraTech
8" Security Chimneys
7"-8" Metalbestos
7"-8"Jackes-Evans
7"-8"Hart & Cooley
7"-8"Pro-Jet
6"-7" Amer. Metals
6"-7"Metal-Fab
6" Air-Jet
Chimney Conversion Kit C (46DVA-KCC)
7"-8" DuraPlus
8" American Metals
8" Air-Jet
8" Metal-Fab
Each Kit Contains:
Cap Adapter
Retro Connector
Additional Required Equipment:
4" Flex (#711 or U.L. 1777)
Termination (46DVA-VCH)
Co-Axial Sections
© Travis Industries
(for qualified installers only)
4/23/2021 - 1480
29
864 40K Install