54
Finalizing the Installation
Rock Wool Placement
The included rock wool is placed on top of the burner to enhance the glow from the burner. The rock
wool works best when it is applied in a very thin layer. The best method for applying the rock wool
is to brush it on to the burner. Compress a clump of rockwool between your thumb and forefinger. Use
a stiff brush to apply a thin layer of rockwool fibers onto the burner. Do not use the entire bag of
rockwool. Use only a small amount and save the remainder. Over-use of rockwool will diminish the glow
and may cause sooting or other adverse conditions.
© Travis Industries
(for qualified installers only)
4/23/2021 - 1480
864 40K Install