Building The Selected Project; Viewing And Editing Project Properties - AMX NETLINX STUDIO V2.4 Instruction Manual

Working With Projects
3. Enter Dealer, Designer, Sales Order, Purchase Order info (maximum of 128 characters each),
and a Description for the Project (maximum of 2,000 characters). These fields are all optional.
4. Click OK to add the new Project to the active Workspace.

Building the Selected Project

You can select to compile a single Project within the open Workspace, using the Build Project
command. When you compile a Project, every Source Code, Include, and Module file contained in
all of the Systems within the selected Project are compiled.
There are several ways to access the Build Project command - via the Build menu, the Project
Folder context menu (in the Workspace tab of the Workspace Window), or via the toolbar button.
To compile a Project:
1. Click to select and highlight the Project that you want to compile (in the Workspace tab of the
Workspace Window).
2. Select Build > Build <Project Name> Project.
3. The status and results of the build are displayed in the Status tab of the Output Display
Window.

Viewing And Editing Project Properties

Use the Project Properties dialog to view and/or edit general properties of the selected Project.
To access this dialog, select Project Properties from the Project menu, the Project Folder context
menu, or click the toolbar button.
You can edit all of the information in this dialog:
34
Any errors detected by the program before the build operation starts are listed in the
Pre-Build Errors dialog.
This dialog gives you the option of ignoring the errors and continuing with the build.
Identifier The Project Identifier is required and can have a maximum of 128 characters.
Dealer Optional, maximum of 128 characters.
Sales Order Optional, maximum of 128 characters.
Designer Optional, maximum of 128 characters.
Purchase Order Optional, maximum of 128 characters.
Description Optional, maximum of 2,000 characters.
NetLinx Studio (v2.4 or higher)