Bowflex Treadmill 22 Service Manual page 61

14. Using a #2 Phillips screwdriver, remove the 2 screws (indicated by
ovals) that attach the Outside-Lower-Left Motor Cover Shroud.
15. Carefully remove the Outside-Lower-Left Motor Cover Shroud, with
the Inside-Lower-Left Motor Cover Shroud still attached to it, from the
Frame.
Motor Cover Shroud,
Outside-Lower-Left
16. Using a 5mm hex wrench from the outside and a 10mm wrench on the
inside of the frame, remove the hardware (indicated by ovals, below) that
secures the Speed Sensor Assembly.
Speed Sensor
Drive Pulley
Motor Cover Shroud,
Inside-Lower-Left
Speed
Sensor
Magnet
Motor Cover Shroud,
Outside-Lower-Left
Zip-Tie
61
Speed Sensor
Drive Pulley
Front Roller
Speed Sensor
Drive Pulley