Bowflex Treadmill 22 Service Manual page 38

5. Using a 16mm and a 17mm wrench in the Motor Compartment, remove the
hardware (indicated by arrows) from the Incline Motor Assembly. Remove the
Incline Motor Assembly noting how it extends from the Motor Compartment
through to the Base Frame Weldment.
6. Confirm that the Walking Deck is secured in the down position. With the
Lifting Handle that is under the Walking Deck, try to slightly lift the Walking
Deck. If the Walking Deck raises, it is not locked. Using the Side Rails, push
the Walking Deck downward until it is secured in the down position.
7. Make sure that there is safe clearance around, above, and to one side of
the treadmill.
A second person is required to assist with the tilting of the
machine. Be sure there is adequate clearance for the machine.
Some components of the equipment can be heavy or awkward.
Enlist the service of a second person when you do maintenance
steps involving these components. Do not try to do heavy or
awkward steps on your own.
8. Tilt the machine onto the side with the safe clearance.
Do not grasp the Console or the Walking Belt to tilt the machine
onto the side. The Console could be damaged, and the Walking
Belt could abruptly move.
Be sure not to push, touch, or release the Walking Deck Re-
lease Button with the machine on its side. If the Walking Deck
is released, the Base Frame Weldment may abruptly pivot away
from the Walking Deck which could cause injury or damage to an
individual and the machine.
9. Using two 17mm wrenches, remove the hardware (indicated by arrow) from
the Incline Motor Assembly.
Walking Deck Release Button
Incline Motor Assembly
Side Rail
Lifting Handle
Incline Motor Assembly
Base Frame Weldment
38
Side Rail