Bowflex Treadmill 22 Service Manual page 45

9. Re-install all remaining parts that were removed in reverse order.
10. Attach the power cord and turn on the Treadmill by flipping the power
switch to ON.
11. From the Power Up screen, tap on the upper-right corner of the
Console Display 10 times. The Console will display the "Advanced User
Actions " menu.
12. From the "Advanced User Actions " menu, tap CALIBRATE in the up-
per right corner of the Console Display. The Console will shift to Calibrate
mode.
13. From the "Calibrate" menu, tap CALIBRATE_MCB.
Be sure the area around the Treadmill is clear of all bystand-
ers, children and pets. Be sure there is nothing on or under
the Walking Belt, or near the Treadmill.
14. The Console will display "CALIBRATE_MCB-USER CONFIRM". Tap it,
and the calibration procedure starts.
Note: The calibration procedure will begin by automatically moving the
Walking Belt and adjusting the incline of the Walking Deck.
Be sure not to touch or allow anyone else to touch the
machine while calibration is occurring.
15. When calibration is complete, the Console will display "CALIBRATE
MCB - PASS".
16. Tap EXIT in the upper-right corner of the Display to exit the Calibrate
Mode.
17. Flip the power switch to OFF. Calibration is now complete for the
machine.
18. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner's Manual.
45