Bowflex Treadmill 22 Service Manual page 59

3. Using a #2 Phillips screwdriver, remove the 2 screws (indicated by ar-
rows) that attach the Left Pivot Cover.
4. Make sure that there is safe clearance around, on and above the
treadmill. Make sure there is no object to spill or cause blockage from the
fully folded position.
Be sure there is adequate height clearance for the raised deck.
5. Using the Deck Handle found below the rear of the walking belt, push
the Walking Deck Release Button and lift the walking deck fully upward
and engage the hydraulic lift. Be sure that the hydraulic lift is correctly
locked in place. You will hear an audible click when the hydraulic lift shifts
into the locked position.
Use proper safety precautions and lifting techniques. Bend
your knees and elbows, keep your back straight and pull up
equally with both arms. Make sure that your own physical
strength is capable of lifting the walking deck until it engages
the locking mechanism. Use a second person if necessary.
Do not use the walking belt or rear roller to lift the treadmill.
These parts do not lock in place and can abruptly move. Injury
to you or damage to the machine can occur.
6. Make sure that the locking mechanism is engaged. Carefully pull back
on the walking deck and make sure that it does not move. When you
do this, keep clear of movement path in case the treadmill lock is not
engaged.
Do not lean against the treadmill when it is folded. Do not put
items on it that could cause it to become unstable or fall.
Note: To assist with re-assembly of the Shrouds, an arrow indicates a
self-tapping screw and an oval indicates a machine screw.
7. Using a #2 Phillips screwdriver, remove the 1 Self-tapping screw (indi-
cated by arrow) from the Outside-Top-Left Motor Cover Shroud.
Left Pivot Cover
59
Motor Cover Shroud,
Outside-Top-Left