Bowflex Treadmill 22 Service Manual page 50

10. Gently pull the old I/O Cable fully from the top of the Right Upright,
routing the new Middle I/O Cable into place. This will remove the old I/O
Cable and place the new I/O Cable in the Right Upright.
Note: Be sure the cable does not crimp when being routed. This step
may take two people to safely pull and feed the cables through the Right
Upright.
11. Remove the cable or string from the cables, and properly dispose of
the old Middle I/O Cable.
12. Connect the cables from the new Middle I/O Cable.
13. Re-install all remaining parts that were removed in reverse order.
14. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner's Manual.
50