Panel Descriptions; Front Panel - Roland VC-100UHD Startup Manual

Panel Descriptions

Front Panel

Name
1
Display
2
[SETUP] button
3
[PAGE/CURSOR] knob
4
[VALUE] knob
5
AUDIO IN/OUT connector
6
LINE IN jacks (L, R)
7
LINE OUT jacks (L, R)
8
REMOTE connector
9
USB HOST port
10
STREAMING port
11
HDMI 4K IN connector
2
1
Explanation
This shows various information about the VC-100UHD.
5 If you press this when it is unlit, the setup menu screen appears.
5 If you press this when it is lit green, you move from the setup menu screen to the status screen, and the button
goes dark.
5 If a lower level of the setup menu screen is shown, this button operates as the [EXIT] button, so that each press
of the button returns to the screen of the next higher level.
The illuminated color of the button indicates the state of this unit.
Indicator Explanation
The status screen is shown.
Unlit
The setup menu screen is shown.
Lit green
Alternatively, panel lock is on (display unlit).
A problem has occurred with this unit while panel lock is on (display unlit).
Blink red
When the upper right of the screen indicates "ENTER, " pressing the [PAGE/CURSOR] knob confirms the
edited value. Alternatively, it executes the operation.
[SETUP] button Explanation
Moves the cursor in the setup menu screen.
Lit green
Switches pages in the status screen.
Unlit
In the status screen or the setup menu screen, use this to enter a value.
If you turn the knob while pressing it, the value changes more greatly.
& "Operating the [VALUE] Knob" (p. 4)
This connector provides analog audio signal input/output (two
balanced inputs and two balanced outputs).
The output signal is the same as the output signal of the LINE OUT
jacks.
These jacks input audio. Connect them to an audio mixer, CD player, or other audio or video device.
CH 1 is L and CH 2 is R.
These jacks output audio. Connect them to an audio recorder, amp, or speaker.
CH 1 is L and CH 2 is R.
This allows you to remotely control this unit from a computer using terminal software.
A USB flash drive can be connected to this port. This is used when updating the system program.
* While the screen indicates "Processing, " never turn off the power or disconnect the USB flash drive.
This is a USB 3.0 B-type port for video/audio output.
When you connect it to a USB port of your computer, this device is recognized as a web camera.
This connector can input video up to 4K. Connect a video device or computer here.
HDMI 2.0b 18 Gbps HDCP 2.2 is supported.
2 3 4
ANALOG OUT ANALOG IN
H H H H
C
C C C
G G G G
CH 2 (R) CH 1 (L) CH 4 (R) CH 3 (L)