Table of Contents
Advertisement
Basic Operations
Video Processing in the VC-100UHD (Overview)
This unit is a scaler equipped with SDI and HDMI inputs and outputs. It can convert between SDI and HDMI, and perform format conversion.
It has three processing systems, MAIN, SUB, and USB, and you can individually specify scaling and output format for each of these.
These processing settings are managed in units called "channels. "
A channel saves the input source selection and the scaler settings for each processing; when you use Setup Menu screen0Root "Processing" 0 "Input"
to select a channel, the settings saved in the channel are applied to the processing.
Each processing differs in functionality such as the effects that are provided. There are also some functions such as the main processing's rotate function
or HDMI thru function that can be obtained by limiting the operation of the sub processing.
INPUT
SDI
Source
Selector
HDMI
Apply the settings
Channel 1–8
Input Source
Processing Scaler Settings
Operating the [VALUE] Knob
Although you can change the value more greatly by turning the [VALUE] knob while pressing it, you can use the following functions to edit the value
even more efficiently.
(1)
If you turn the [VALUE] knob while pressing it, and then stop turning it but continue to press it, the value changes continuously.
(2)
If you continue pressing the knob and repeat operation (1), the change becomes faster each time you repeat this.
(3)
If you continue pressing the [VALUE] knob and then press the [SETUP] button, the value returns to the original value before editing.
(4)
If you continue pressing the [VALUE] knob and then long-press the [SETUP] button, the value returns to the default value.
4
Main Processing
4K Scaler
Sub Processing
4K Scaler
USB Streaming
FHD Scaler
In the Setup Menu, use Root "Processing" 0 "Input"
to select a channel
Output Format
Output ROI
Output Format
Output ROI
Output Format
OUTPUT
SDI
Cross-Point
HDMI
USB
Advertisement
Table of Contents
