Panel Descriptions - Roland UM-ONE Owner's Manual

Panel Descriptions

Note
Do not connect the UM-ONE to the computer until the driver has been installed (p. 9).
1
No. Name
1 USB Cable
2 USB Indicator
3 MIDI IN Indicator
4 MIDI OUT Indicator
MIDI IN Cable
5
(CONNECT TO MIDI OUT)
MIDI OUT Cable
6
(CONNECT TO MIDI IN)
7 [COMP/TAB] Switch
8
2
7
Description
Connects the UM-ONE to a computer.
Lights when the UM-ONE is connected to a computer and
the computer has detected the UM-ONE.
Lights when MIDI messages are received from the device
connected to the MIDI IN cable.
Lights when MIDI messages are sent from the computer.
Connects to the MIDI OUT connector of the MIDI device
(such as a MIDI keyboard) that will be used for MIDI
recording or for playing a software sound module.
Connects to the MIDI IN connector of a hardware sound
module when DAW software is used to play the hardware
sound module.
COMP
TAB
3 4
For connecting a computer. Refer to "Using the
UM-ONE with a Computer" (p. 12).
In order to use the COMP setting, you must
install the driver in your computer.
For connecting an iPad. Refer to "Using
the UM-ONE with an iPad" (p. 12). Driver
installation is not necessary.
6
5