Table of Contents
Advertisement
Operations in the Status/Setup Menu Screens
On this unit you'll use the "status screen" or the "setup menu screen" to
make various settings.
The status screen is shown when the [SETUP] button is unlit, and the
setup menu screen is shown when the button is lit green.
Operations in the Status Screen
1.
Press the [SETUP] button to make the button go dark.
The status screen appears.
Unlit
2.
Turn the [PAGE/CURSOR] knob to switch pages.
3.
When the upper right of the screen indicates "ENTER,"
press the [PAGE/CURSOR] knob.
4.
Turn the [PAGE/CURSOR] knob to select a parameter.
5.
Turn the [VALUE] knob to change the value of the setting.
& "Operating the [VALUE] Knob"
6.
Press the [SETUP] button to complete the change in
settings.
Status screen
Here you can check the status of this unit's signals. This also provides
shortcuts to frequently-used parameters.
Setup Menu screen
Here you can make operation settings for this unit.
Operations in the Setup Menu Screen
1.
Press the [SETUP] button to make the button light green.
The Root menu screen in the Setup Menu appears.
Lit green
2.
Turn the [PAGE/CURSOR] knob to select a main item in the
Root menu, and then press the [PAGE/CURSOR] knob.
3.
Turn the [PAGE/CURSOR] knob to select a subsidiary item,
and then press the [PAGE/CURSOR] knob.
4.
Turn the [PAGE/CURSOR] knob to select a parameter, and
then turn the [VALUE] knob to change the value of the
setting.
& "Operating the [VALUE] Knob" (p. 4)
MEMO
5 Pressing the [SETUP] button moves you back one level higher.
5 When the upper right of the screen indicates "ENTER, " press the
[PAGE/CURSOR] knob to confirm the value.
Basic Operations
5
Advertisement
Table of Contents
