Brother RJ-3150 Manual page 233

RJ-3150
Adding a custom media size for continuous roll (Linux®)
To add a custom media size for continuous roll, do the following:
1. Run the command to add a custom media size.
a. Add a new Label Format with the "New Label Format" name and set the 30mm width and length and the 3mm label gap:
"brpapertoollpr_td4550dnwb -P TD4550DNWB -n Papar_Name -w 30 -h 30 -g 3.0 -b 3 -t 3 -r 1.5 -l 1.5 -e 11 -S [0/1/2] [-m 0.0 -o 0.0]" [Enter]
(Type the whole command as a single line before you press enter):
In the case of S=0,1 then program not need (-m 0.0 -o 0.0).
-P Printer Name, e.g. td4550dnwb
-n New Label Name
-w label width
-h label length
-g label spacing
-b bottom margin
-t top margin
-r right margin
-l left margin
-e energyRank[optional]
-S 0/1/2(0:Continuous Length Roll/1:Die-Cut Label/2:Media With Marks)
-m mark
-o mark offset
b. Remove the Label Format with the "New Label Format" name:
"brpapertoollpr_td4550dnwb -P TD-4550DNWB -d Paper_Name" [Enter]
Enter the Width and Height/Length in mm.
Superuser authorization is required.
2. Select the new media size from "Set Printer Options" in "http://localhost:631/printers".
3. Try a test print from "Print Test Page".
© 2001-2019 Brother Industries, Ltd. All Rights Reserved.
Any trade names and product names of companies appearing on Brother products, related documents and any other materials are all trademarks or registered trademarks of those respective companies.
227 / 237
Go to Index
Go to Index