You can only specify settings when LEAP, EAP-FAST, PEAP, EAP-TTLS or EAP-TLS is selected as the authentication method. In addition, with EAP-TLS, it is not necessary to register a password, but a client

certificate must be registered. To register a certificate, connect to the printer from a web browser, and then specify the certificate.

8. Display the key and password on-screen

If this check box is selected, keys and passwords will be displayed in plain text (non-encrypted text).

Communication Modes and Authentication Methods / Encryption Modes

When [Communication Mode] is set to [Ad-hoc]

Authentication Method

Open System

When [Communication Mode] is set to [Infrastructure]

Authentication Method

Open System

Shared Key

WPA/WPA2-PSK

LEAP

EAP-FAST/NONE

EAP-FAST/MS-CHAPv2

EAP-FAST/GTC

PEAP/MS-CHAPv2

PEAP/GTC

EAP-TTLS/CHAP

EAP-TTLS/MS-CHAP

EAP-TTLS/MS-CHAPv2

EAP-TTLS/PAP

EAP-TLS

To perform higher level security settings:

When performing certificate verification with EAP-FAST, PEAP, EAP-TTLS or EAP-TLS authentication methods, the certificate cannot be specified from [Printer Setting Tool]. After the printer is

configured to connect to the network, specify the certificate by accessing the printer from a web browser.

Wireless Direct Tab

Wireless Direct Settings

1. SSID / Network Key Generation

Select [AUTO] or [STATIC].

Communication Modes and Authentication Methods / Encryption

Encryption Mode

None / WEP

Encryption Mode

None / WEP

WEP

TKIP+AES / AES