Brother RJ-3150 Manual page 170

RJ-3150
6. International Character Set
Lists character sets for specific countries.
Available settings: [United States], [France], [Germany], [Britain], [Denmark], [Sweden], [Italy], [Spain], [Japan], [Norway], [Denmark II], [Spain II], [Latin America], [Korea], [Legal]
The following 12 codes are switched depending on the country selected from the list above: 23h 24h 40h 5Bh 5Ch 5Dh 5Eh 60h 7Bh 7Ch 7Dh 7Eh
For switched characters, download the P­touch Template Manual / Command Reference (English only) from the [Manuals] page.
7. Command Prefix Character
Change the prefix character code. Set a single character code.
The prefix character is a code to identify commands used in P­touch Template mode.
8. Non­Printed Character
Characters specified here are not printed when data is received. Specify 1 to 20 characters.
9. Available Return Code
The line feed code is used when feeding data to indicate that the following data should be moved to the next line in a text object. One of the following four line feed codes can be selected, or 1 to 20
characters can be specified as the line feed code.
Available settings: [^CR], [\0D\0A], [\0A], [\0D]
10. Replace FNC1
Select whether or not GS codes, which are included in barcode protocols such as GS1­128 (UCC/EAN­128), are replaced with FNC1 codes.
If this check box is selected, a received GS code is replaced with the FNC1 code. If this check box is cleared, a received GS code is outputted as is.
11. Number of Copies
Sets the number of copies. A number between 1 and 99 can be specified.
12. Give priority to print quality
Select the print quality setting. If this check box is selected, priority is given to the print quality.
If this check box is cleared, priority is given to the print speed.
13. Inverted 180 Degrees
If this check box is selected, the data will be printed after it has been rotated 180 degrees.
14. Set
After the [Set] button is clicked, the settings are saved as an .ini file when the dialog box is closed.
To save the specified settings in a command file, select [Save in Command File] from the drop­down menu. The saved command file can be used with the mass storage feature to apply the settings to a
printer.
15. Cancel
Cancels the settings and closes the dialog box. The settings will remain unchanged.
16. Default
Click this button to return the settings to their factory defaults.
© 2001­2018 Brother Industries, Ltd. All Rights Reserved.
Any trade names and product names of companies appearing on Brother products, related documents and any other materials are all trademarks or registered trademarks of those respective companies.
164 / 237
Go to Index
Go to Index