Brother RJ-3150 Manual page 131

RJ-3150
Reset to Default Communication Settings
Returns the communication settings to their factory defaults.
Help menu
Display Help
Displays the Help.
About
Displays the version information.
General Tab
Communication settings
1. Network Settings on Power On
Determines the conditions for connecting via Wi-Fi® when the printer is turned on. Select [On by Default], [Off by default] or [Keep Current State].
2. Selected Interface
Select [Wireless LAN] or [Wireless Direct].
3. Bluetooth on Power On
Determines the conditions for connecting via Bluetooth
IPv6
1. IPv6 Usage
Select [Enable] or [Disable].
2. Priority on IPv6 address
Select to give priority to an IPv6 addresses.
Wireless LAN Tab
TCP/IP (Wireless)
® when the printer is turned on. Select [On by default], [Off by default] or [Keep Current State].
125 / 237
Go to Index
Go to Index