Brother RJ-3150 Manual page 173

RJ-3150
1. Disable these settings
When this check box is selected,
The settings in a tab where
[Export] command is executed.
To apply the settings to the printer or save or export them, be sure to clear the check box.
2. Auto Power Off
Specify the amount of time that passes before the printer turns off automatically.
Available settings: [None], 1/2/3/4/5/6/7/8/9/10/20/30/40/50/60 minutes
3. Exit Position (RJ-3150/3150Ai only)
If RJ-3050/3050Ai was selected for [Printer], this item is unavailable. Select the media output location.
Available settings: [Tear], [Peeler]
4. Command Mode
Select the printer's command format.
Available settings: [Raster], [ESC/P], [P-touch Template], [CPCL emulation], [CPCL Line Print emulation]
5. Text Direction
Select the printing orientation.
Available settings: [Normal], [Inverted 180 Degrees]
This setting is applied only if the printer driver is not used. If the printer driver is used, the setting specified in the printer driver will be applied.
6. Print Speed
Select the printer's printing speed.
Available settings: [2 ips / 50.8 mm/s], [3 ips / 76.2 mm/s], [4 ips / 101.6 mm/s], [5 ips / 127 mm/s]
7. Print Density
Adjust the printer's printing density.
Available settings: -5–+5
8. Align Paper Leading Edge when the Cover is Closed
Select whether or not the paper is automatically fed when the cover is closed.
Available settings: [Feed], [Do not Feed]
9. Printing Reference Point Adjustment
Adjust the position of the reference point (point of origin for printing). This corrects printing misalignments resulting from differences in printer models or from the fixed margins of some applications.
The reference point cannot be adjusted for raster printing.
10. Tear Adjust
Adjust the tear bar tear off position for paper media.
Available settings: -0.39" to 0.39" (-10.0 mm to 10.0 mm)
Advanced Tab
1. Disable these settings
When this check box is selected,
The settings in a tab where
[Export] command is executed.
To apply the settings to the printer or save or export them, be sure to clear the check box.
appears in the tab, and the settings can no longer be specified or changed.
appears will not be applied to the printer even if [Apply] is clicked. In addition, the settings in the tab will not be saved or exported when the [Save in Command File] or
appears in the tab, and the settings can no longer be specified or changed.
appears will not be applied to the printer even if [Apply] is clicked. In addition, the settings in the tab will not be saved or exported when the [Save in Command File] or
167 / 237
Go to Index
Go to Index